رفتن به محتوای اصلی
x

Year

Title

2026

Sensitivities of Transverse and Torsional Vibrations to Gear Tooth Crack Growth: A Numerical and Experimental Comparison

2026

Free vibration analysis of cylindrical shells made of functionally graded porous materials with variable thickness

2026

Sound quality enhancement of non-stationary noises in hybrid electric powertrains using a Short Time Fourier Transform-Based Fuzzy Filtered-x Least Mean Square Controller

2026

Towards Reliable Intelligent Fault Diagnosis of Rolling Element Bearings: The Role of Signal Quality

2026

Frequency-domain fuzzy-FxLMS algorithm for active sound profiling in hybrid powertrains in various speeds

2026

Helmholtz-resonator triboelectric nanogenerator with trapezoidal neck and flexible end-sealing for enhanced low-frequency acoustic energy harvesting

2026

Active Quasi-zero-stiffness Isolator With Hydraulic Mass Compensator and Fuzzy-PID Controller

2026

Non-destructive classification of rice varieties and mixtures using acoustic absorption spectroscopy and deep learning

2026

Design, fabrication, and acoustic characterization of novel 3D knitted pyramidal sandwich composites: Experimental, analytical, and numerical investigation

2026

Isfahan Artificial Intelligence Event 2024, Challenge I: Respiratory Depression Detection

2026

Nonlinear quasi-static thermoelastic analysis and bistability of multilayer composite plates using the carrera unified formulation

2026

Vibration analysis of cylindrical shells made of functionally graded porous materials with variable thickness in contact with fluid

2026

Numerical Fatigue Life Analysis for Battery Pack of Electric Bus Under Random Vibration

2026

Investigation of the Conditions Required for the Propagation of Plane Waves in Air-and Water-Filled Acoustic Waveguides

2026

Frequency Analysis of a Membrane-coupled Helmholtz Acoustic Metamaterial

2026

A Design Strategy for Twisted-Beam Mechanical Metamaterials with Design-Tunable Complete Bandgaps

2026

Design and Modeling of a Quasi-Zero Stiffness Vibration Isolator

2025

The effects of core negative stiffness on sound transmission loss of composite sandwich panels

2025

Multi-fidelity transfer learning approach for predicting the speed of chatter occurrence in a cold rolling mill

2025

Evaluation of Signal Processing and Deep Learning Methods for Inter-Beat Interval Extraction from Ballistocardiography Signals

2025

Energy harvesting from vibrations of a bi-stable curved fiber composite plate using piezoelectric layers

2025

Investigation of the static stable states of a bistable composite rectangular plate with curved fibers and piezoelectric layers

2025

Energy Harvesting from Beam Vibrations with Piezoelectric Patch under Transient Non-Contact Mass, Applicable in Speed Bumps

2025

Analytical modeling of sound transmission loss in shunted piezo-plate acoustic metamaterials  

2025

Optimization and experimental validation of anti-tri chiral lattice metamaterial for broadband vibration suppression  

2025

Acoustic energy harvesting from sonic crystals with non-square lattices using piezoelectric patch  

2025

Computational Modeling of Cardiovascular-Induced Chest Vibrations: A Review and Practical Guide for Seismocardiography Simulation 

2025

Low-frequency sound transmission loss of sandwich panels with stretch-dominant auxetic core

2025

Geometric modeling and dynamic analysis of cantilever beams for energy harvesting

2025

Energy harvesting from vibrations of a beam under mass passage by arc-shaped auxetic cantilever beams

2024

Analysis of hyperbolic crystals with non-square lattice for improving acoustic energy harvesting

2024

Dynamic modeling and simulation of a new conceptual design of a magnetic capsule robot by application of endoscopic capsule

2024

Energy harvesting from vibrations of a beam under moving mass using auxetic cantilever beams: Theoretical and experimental investigations

2024

New design of materials, order and thicknesses of an aircraft windshield behaviour layers to increase its resistance against repeated bird impacts

2024

Harvesting vibration energy by quad-stable piezoelectric cantilever beam: Modeling, fabrication and testing

2024

Energy harvesting from walking vibration using a piezoelectric harvester contacting nonlinear supports

2024

Free vibration analysis of graphene reinforced functionally graded nanocomposite plates in contact with quiescent bounded fluids on both sides

2024

Design, modelling and experimental verification of a tunable electromagnetic generator for multi-directional vibration energy harvesting

2024

Enhanced sound transmission loss of a truss-like cellular structure in broad-band low frequency domains

2024

A comprehensive formulation for determining static characteristics of mosaic multi-stable composite laminates under large deformation and large rotation

2024

Redesign an aircraft windshield to improve its mechanical resistance against simultaneous bird impacts

2023

An Investigation into the Impact of Fiber Material, Fabric Texture, Dirt Type, and Fabric Area Density on Ultrasonic Cleaning of Woven Textiles

2023

Bandgap and wave attenuation optimization of tetra-chiral metamaterial using PSO algorithm

2023

Comparison of transverse and torsional vibrations of a one-stage gearbox in fault diagnosis of crack defects in different speeds

2023

Energy harvesting of nanofluid-conveying axially moving cylindrical composite nanoshells of integrated CNT and piezoelectric layers with magnetorheological elastomer core under external fluid vortex-induced vibration

2023

Analytical determination of non-local parameter value to investigate the axial buckling of nanoshells affected by the passing nanofluids and their velocities considering various modified cylindrical shell theories

2023

Backpack with a nonlinear suspension system designed for low walking speeds

2023

Piezoelectric-based energy harvesting from bridge vibrations subjected to moving successive vehicles by functionally graded cantilever beams – Theoretical and experimental investigations

2023

Three-dimensional numerical simulation of particle acoustophoresis: COMSOL implementation and case studies

2023

A MICROMECHANICAL STUDY ON DP600 STEEL UNDER EXTREMELY LOW-CYCLE FATIGUE

2022

Active noise control for global broadband noise attenuation in a cylindrical cavity using Modal FxLMS algorithm

2022

Free vibrational analysis of variable thickness plate made of functionally graded porous materials using internal supports in contact with bounded fluid

2022

Nonplanar vibration and flutter analysis of vertically spinning cantilevered piezoelectric pipes conveying fluid

2022

A finite element study on femoral locking compression plate design using genetic optimization method

2022

Investigating the multiple scales method based on a new scaling for energy harvesting from a double cantilever beam with internal resonance

2022

Hydro–Hygro–Thermo–Magneto–Electro elastic wave propagation of axially moving nano-cylindrical shells conveying various magnetic-nano-fluids resting on the electromagnetic-visco-Pasternak medium

2022

Static and dynamic analysis of a bistable plate under nonlinear magnetic force

2022

Chaotic vibration of atomic force microscopes based on the modified couple stress theory

2022

Theoretical and Experimental Investigation of Free Vibrations of Rectangular Plates with Vertical Patterns

2022

Finite element analysis of coupled phase-field and thermoelasticity equations at large strains for martensitic phase transformations based on implicit and explicit time discretization schemes

2022

Effect of iron bicrystal orientation on mechanical properties and dislocation density using molecular dynamics simulations of nanoindentation

2021

Energy harvesting from longitudinal and transverse motions of sea waves particles using a new waterproof piezoelectric waves energy harvester

2021

Energy harvesting from a nonlinear magnet-piezoelectric multi-frequency converter array

2021

A geometrically exact model for predicting statics and snap-through behaviors of bi-stable composite laminates

2021

Experimental and numerical investigation of energy harvesting from double cantilever beams with internal resonance

2021

Molecular dynamics simulation and experimental investigation of tribological behavior of nanodiamonds in aqueous suspensions

2021

Applying load-sharing method to the sliding contact in the presence of nano-lubricants

2021

Energy harvesting from nonlinear vibrations of an L-shaped beam using piezoelectric patches

2021

Development of a sound quality evaluation model based on an optimal analytic wavelet transform and an artificial neural network

2020

The effects of wedge geometrical parameters and arrangement on the sound absorption coefficient – A numerical and experimental study

2020

Radiated sound control from a smart cylinder subjected to piezoelectric uncertainties based on sliding mode technique using self-adjusting boundary layer

2020

An atomistic perspective into the fracture behaviour of Fe-bicrystal

2020

A micro mechanical study on DP600 steel under tensile loading using Lemaitre damage model coupled with combined hardening

2020

Energy harvesting from moving harmonic and moving continuous mass traversing on a simply supported beam

2020

A new three-dimensional dynamic model and experimental validation for motion of a part in a vibratory bowl feeder

2019

A robust optimum controller for suppressing radiated sound from an intelligent cylinder based on sliding mode method considering piezoelectric uncertainties

2019

Modeling length scale effects on strain induced grain boundary migration via bridging phase field and crystal plasticity methods

2019

A Novel Approach for Energy Harvesting from Feedback Fluidic Oscillator

2019

Phase field modeling of stressed grain growth: Effect of inclination and misorientation dependence of grain boundary energy

2019

Micromechanical analysis of orientation dependency on deformation behavior in DP steels by dislocation density-based crystal plasticity simulation

2019

An optimized approach for computing coincidence-site-lattice grain boundary energy

2019

Bi-stable hybrid composite laminates containing metallic strips: An experimental and numerical investigation

2019

On the fatigue behavior of additive manufactured lattice structures

2019

On the use of local maximum entropy approximants for Cahn–Hilliard phase-field models in 2D domains and on surfaces

2019

Characterization of bi-stable pure and hybrid composite laminates – An experimental investigation of the static and dynamic responses

2019

Fast optimization of tuned mass-spring arrangement for reduction of acoustic power radiation of submerged ribbed cylinder

2019

On using a distributed-parameter model for modal analysis of a mistuned bladed disk rotor and extracting the statistical properties of its in-plane natural frequencies

2019

Prediction of psychoacoustic metrics using combination of wavelet packet transform and an optimized artificial neural network

2018

Strain hardening and micro-deformation behavior in advanced DP and TRIP steels: EBSD examinations and crystal plasticity simulations

2018

Mathematical modeling of dynamic behavior of fluid bilayer membranes under the effect of density asymmetry

2018

Optimization of spiral-shaped piezoelectric energy harvester using Taguchi method

2018

Effect of size on the dynamic behaviors of atomic force microscopes

2018

Operational modal analysis and fatigue life estimation of a chisel plow arm under soil-induced random excitations

2018

Energy harvesting from vibration of Timoshenko nanobeam under base excitation considering flexoelectric and elastic strain gradient effects

2017

Vibration suppression of a piezo-equipped cylindrical shell in a broad-band frequency domain

2017

Constitutive modeling of strain induced grain boundary migration via coupling crystal plasticity and phase-field methods

2017

Experimental and numerical vibration analysis of wire rope isolators under quasi-static and dynamic loadings

2017

Surface layer and nonlocal parameter effects on the in-phase and out-of-phase natural frequencies of a double-layer piezoelectric nanoplate under thermo-electro-mechanical loadings

2017

Correlation of the high and very high cycle fatigue response of ferrite based steels with strain rate-temperature conditions

2017

A finite-deformation dislocation density-based crystal viscoplasticity constitutive model for calculating the stored deformation energy

2017

Improving the read/write performance of hard disk drives under external excitation sources based on multi-objective optimization

2017

A new approach to design safe-supported HDD against random excitation by using optimization of rubbers spatial parameters

2017

Two-phase vesicles: a study on evolutionary and stationary models

2017

Optimization of passive control performance for different hard disk drives subjected to shock excitation

2017

Vibration analysis of bi-stable composite cross-ply laminates using refined shape functions

2017

A novel methodology for wing sizing of bio-inspired flapping wing micro air vehicles: theory and prototype

2017

Increasing the performance of a rotary piezoelectric frequency up-converting energy harvester under weak excitations

2016

Active control of radiated sound power of a smart cylindrical shell based on radiation modes

2016

Experimental and theoretical investigations on piezoelectric-based energy harvesting from bridge vibrations under travelling vehicles

2016

Thermal response of DP600 dual-phase steel under ultrasonic fatigue loading

2016

Grain boundary effects on nanoindentation of Fe bicrystal using molecular dynamic

2016

An experimental and analytical piezoelectric energy harvesting from a simply supported beam with moving mass

2016

Experimental and theoretical studies on piezoelectric energy harvesting from low-frequency ambient random vibrations

2016

Micromechanical analysis of martensite distribution on strain localization in dual phase steels by scanning electron microscopy and crystal plasticity simulation

2016

Dynamic responses of cross-ply bi-stable composite laminates with piezoelectric layers

2016

Electromechanical behavior of a pendulum-based piezoelectric frequency up-converting energy harvester

2016

Thermohydrodynamic analysis of foil journal bearings using differential quadrature method

2016

A Microstructural Finite Element Analysis of TWIP Steel Based on Dislocation Density Model

2016

Active structural acoustic control of a smart cylindrical shell using a virtual microphone

2016

A vibration-based energy harvester suitable for low-frequency, high-amplitude environments: Theoretical and experimental investigations

2016

Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures

2016

Modal structural acoustic sensing with minimum number of optimally placed piezoelectric sensors

2016

Effects of mistuning on dynamic behavior of nonlinear cyclic systems with lump masses and cubic nonlinearity

2015

Improved crack closure line position: An improved model for crack breathing phenomenon

2015

Nonlinear coupled longitudinal–transverse vibration analysis of a beam subjected to a moving mass traveling with variable speed

2015

Finite Element Analysis on Chattering in Cold Rolling and Comparison with Experimental Results

2015

Vibration analysis of a beam with moving support subjected to a moving mass travelling with constant and variable speed

2015

Elastic behavior of carbon nanocoils: A molecular dynamics study

2015

An equivalent model for trapezoidal corrugated cores based on homogenization method

2015

Experimental and Finite Element Simulation of Wear in Nanostructured NiAl Coating

2015

Improved Crack closure line position: An improved model for crack breathing phenomenon

2015

A technique for calculating particle systems containing rigid and soft parts

2015

Effect of microstructure pattern on the strain localization in DP600 steels analyzed using combined in-situ experimental test and numerical simulation

2015

Theoretical and experimental study of active vibration control of a cylindrical shell using piezoelectric disks

2015

Formation and coalescence of strain localized regions in ferrite phase of DP600 steels under uniaxial tensile deformation

2015

A three dimensional extended Arlequin method for dynamic fracture

2014

Stochastic modelling of clay/epoxy nanocomposites

2014

Optimization of cocoa butter analog synthesis variables using neural networks and genetic algorithm

2014

Experimental and analytical study on fiber-kinking failure mode of laminated composites

2014

Bird strike analysis on a typical helicopter windshield with different lay-ups

2014

Performance of piezoelectrically actuated micropump with different driving voltage shapes and frequencies

2014

A semi-concurrent multiscale approach for modeling damage in nanocomposites

2014

Prediction of all-steel CNG cylinder fracture under impact using a damage mechanics approach

2014

Effect of solid distribution on elastic properties of open-cell cellular solids using numerical and experimental methods

2014

A Dislocation Density-Based Model for Analyzing Mechanical Behavior of Dual-Phase Steels

2014

Vibrational power flow analysis of a cylindrical shell using a four-point technique

2014

The mechanical behavior of composite corrugated core coated with elastomer for morphing skins

2014

Elastic properties of carbon nanoscrolls

2014

Temperature-curvature relationships in asymmetric angle ply laminates by considering the effects of resin layers and temperature dependency of material properties

2014

Dynamic analysis of a high speed rotor-bearing system

2014

New bird model for simulation of bird strike on various layups used in transparent components of rotorcrafts

2013

Vibration analysis of rotating systems with open and breathing cracks

2013

Dynamic response of a multi-span Timoshenko beam with internal and external flexible constraints subject to a moving mass

2013

Equivalent models of composite corrugated cores with elastomeric coatings for morphing structures

2013

An approach for simulating microstructures of polycrystalline materials

2013

A new bird model and the effect of bird geometry in impacts from various orientations

2013

A numerical 2D simulation of part motion in vibratory bowl feeders by discrete element method

2013

Microstructure Modelling of Dual-Phase Steel Using SEM Micrographs and Voronoi Polycrystal Models

2013

The effects of lateral-torsional coupling on the nonlinear dynamic behavior of a rotating continuous flexible shaft-disk system with rub-impact

2013

Modeling of the plastic deformation of polycrystalline materials in micro and nano level using finite element method

2013

A novel method for slant crack detection in rotors based on turning in two directions

2013

The worst response of mistuned bladed disk system using neural network and genetic algorithm

2013

An effective damage identification approach in thick steel beams based on guided ultrasonic waves for structural health monitoring applications

2013

A frequency response based structural damage localization method using independent component analysis

2013

Thermal response and stability characteristics of bistable composite laminates by considering temperature dependent material properties and resin layers

2013

Vibration modeling and modification of cutting platform in a harvest combine by means of operational modal analysis (OMA)

2013

The effect of piezoelectricity on the mineralization of calcium phosphate in piezoelectric biomaterials

2013

Micromechanical modelling of damage behaviour of Ti-6Al-4V

2013

Vibration suppression of a symmetrically cantilever composite beam using internal resonance under chordwise base excitation

2012

Mechanical property evaluation of buckypaper/epoxy composites using molecular dynamics simulations fully implemented on graphical processing units

2012

On the experimental and numerical investigation of clay/epoxy nanocomposites

2012

The effect of vacancy defects and temperature on fundamental frequency of single walled carbon nanotubes

2012

Disk position nonlinearity effects on the chaotic behavior of rotating flexible shaft-disk systems

2012

A numerical study on mechanical performance of asphalt mixture using a meso-scale finite element model

2012

Bearings coefficients effects on chaotic and bifurcation behavior of flexible rotor systems subjected to rub-impact

2012

Effect of bird geometry and orientation on bird-target impact analysis using SPH method

2012

Numerical and experimental investigations on mechanical behavior of composite corrugated core

2012

Synthesis, characterization and bioactivity evaluation of porous barium titanate with nanostructured hydroxyapatite coating for biomedical application

2012

An investigation on mechanical behavior of barium titanate foam with hydroxyapatite coating

2012

Effect of added tip mass on the nonlinear flapwise and chordwise vibration of cantilever composite beam under base excitation

2012

Fabrication and mechanical property prediction of carbon nanotube reinforced Aluminum nanocomposites

2012

Compression failure and fiber-kinking modeling of laminated composites

 


تحت نظارت وف ایرانی